Japan Carmate Suzuki Jimny Sierra 64W 74W Dedicated Central Control Storage Rack Non Slip Mat Sundries Rack

Since it is specially designed for Jimny, we use the same resin as Jimny's interior color instead of the general black resin. The body surface treatment is the same as the interior of the Jimny, making it look like the real product. The base and tray are secured with two M8 bolts so they can be removed if needed.
Suitable for placing small objects, the dimensions of the tray (inside) are about 190mm wide, 120mm deep and 30mm high. The load-bearing capacity is less than 800g. Conveniently keep keys, smartphones, wallets, cigarettes, heat-not-burn tobacco, etc. in your pocket.
Angled tray design, the tray is designed to be tilted about 13° from the side of the dashboard to the front, instead of being placed horizontally. By making it at an angle, it won’t block the air conditioning vents and objects placed on the tray will have a hard time falling towards you.
With non-slip mat, the inner side (bottom) of the tray is made of soft elastomer resin, which is a soft material that is gentle to the things placed on it. It is a plastic with a wet and non-slip texture, but with high durability and no peculiar smell of rubber, used for genuine vehicle parts and also for non-metallic tire anti-skid chains.
Offset installation considering driving operation, the tray is designed to be offset toward the passenger seat so it does not interfere with driving operation. There is approximately 40 mm of space between the handle and the tray wall. Some people may find it a bit oppressive, but the close integration of the handle and the tray makes it easy to store and place things while driving.
If the intermittent wiper control lever is replaced, your hand is likely to hit the tray when you grasp the control lever from the side to adjust the operation timing. By operating the control lever from below, you can operate it without touching it.
Perfect installation design, because it is dedicated, it uses the same clips as the genuine product and can be perfectly fixed on the dashboard of Jimny. Additionally, since it is simply replaced in the place of the genuine panel, it will not scratch or leave marks around it.
Includes a tool to remove genuine panels (time required: 3 minutes), including installation of required panels (lining). Just follow the method in the instruction manual to remove the genuine panel and replace it with this product, so if you are good at the job, it will take less than 1 minute, if you are not good at it, it will take 5 minutes to complete the installation work.
The tray can also be removed if necessary. Since the base and tray are fixed with two M8 bolts, they can be removed as needed, for example when driving off-road.